Order
Info
Data
Accesory
Sie sind hier: Devices > PDM > PDM32
PDM32
PDM32
photo photo photo
The AiM PDM32 is a power distribution module that replaces conventional fuse and relay systems. It has 32 power outputs with different power levels. With the integrated data recording, the 8 analogue/digital, 2 speed and 4 digital inputs can be recorded.
delivery status: available for immediate delivery
article number description Info image /unit* order
OAPD3211-SGPDM32 w. connector, GPS, LVDS connection cable PDM32
2380,00 €
  Place in cart
OAPD3211-RD10GPDM32 w. Display 10 PDM32
3213,00 €
  Place in cart
OAPD3211-SD10GPDM32 w. Display 10 PDM32
3213,00 €
  Place in cart
OAPD3211-RD6GPDM32 w. Display 6 PDM32
2915,50 €
  Place in cart
OAPD3211-SD6GPDM32 w. Display 6 PDM32
2915,50 €
  Place in cart
* prices incl. VAT plus package and delivery.
The AiM PDM32 is a power distribution module that replaces conventional fuse and relay systems. It has 32 power outputs with different power levels. The 8 analogue/digital, 2 speed and 4 digital inputs can be recorded with the integrated data recording.

Two of the three CAN interfaces can be connected to over 2.000 ECUs from the industry's leading ECU manufacturers. AiM extensions such as GPS, SmartyCam, etc. are connected to the third CAN interface. The PDM32 can be connected to a 6" or 10" TFT display via the Lin Bus. As the 10" display does not have its own buttons, the Remote Control Module should also be used.

All this is housed in an IP65 splash-proof aluminium housing. Up to two reversing cameras can also be connected to the PDM32.



Logo CAN-Bus Technologie 
CAN-Bus Technology

Special Features PDM32

  • 4 switching outputs up to 20 A 
  • 12 switching outputs up to 15 A  
  • 12 switching outputs up to 10 A 
  • 4 half-bridge outputs up to 35 A
  • 8 Analog-/Digital inputs
  • 4 Digitale inputs
  • 2 Speed inputs
  • Total current 120 A
  • 4 GB memory
  • 3 CAN interfaces
  • ECU Interface (CAN, RS232)
  • Input for rear camera

Connection example AiM PDM32

Anschlussbeispiel AiM PDM32

Technical Data AiM PDM32

Rev counter Tapping from the control unit CAN/RS 232
Indication area 0 up to 22.000 rpm
Time measurement Triggering over CAN-Optical-Beacon or GPS
Lap times without limit, up to 5 split times
Measuring accuracy 1/100 sec.
Analog channels 8 Inputs (0-5 V, 12 bit)
with switchable pull-up resistor
Switching outputs

4x Switch output up to 20 A 
12x Switch output up to 15 A 
12x Switch output up to 10 A
4x Half-back outltes up to 35 A

Total power 120 A
Speed 2 digital inputs
Acquisition via inductive wheel speed sensor ABS, CAN/RS232 or GPS
Indication in km/h or mph 
Sampling rate 10 - 100 Hz, free arbitrary
Acceleration triaxial ± 5 g and Gyroscope integrated in the logger
Sampling rate acceleration sensor 1 - 100 Hz, free arbitrary
Sampling rate Gyroscope 1 - 50 Hz, free arbitrary
Total sampling rate 8950 Hz (withoute ECU)
Connector AMP 35 pin, black 
AMP 35 pin, grey
Binder 711, 3-pin
Binder 711, 5-pin
Amphenol
Rosenberger LVDS
Additional function rear camera input
4 digital inputs
calculated channels
Data storage non volatile 4 GB- storage
Data transfer USB
Power supply over 12V on-board power supply
In / Out over ignition switch 
no data loss after switching off
Updates Software- and Firmware updates for free over the internet
Measurement 234,5 x 94,6 x 49,5 mm
Weight 761 gr

The inputs on the PDM32

Die Eingänge des AiM PDM32
1 AMP Stecker 35-pin, black 2 AMP Stecker 35-pin, grey 3 Amphenol connection to the battery
4 Status LED's 5 Display connection LVDS 6 USB connection between PC and PDM
7 Connection for 2x rear camera


Overview of the Power Distribution Module

AiM PDM32 Systemübersicht AiM PDM08 Systemübersicht
PDM32 PDM08
Supply
Power supply 9 - 15 VDC 9 - 15 VDC
Power consumption mA (max.) 450 450
Inputs
Analog [optional] 8 [40] 6 [40]
Analog 0 - 5 V x x
Analog 0 - 12 V x x
ECU Channels [max.] 120 120
Digital [optional] 14 [24] 8 [24]
Thermocouple [optional] - [40] - [40]
Speed 2 2
Lap time GPS x x
Lap time optical - -
Lap time magnetic - -
Rear camera 2 -
External Keyboard o [RBI] o [RBI]
RPM over coil o o
Outputs
Signal / Digital 32 8
CAN 2 2
Reference voltage 5V 5V
Communication
CAN Interface 3 3
K-Line 1 1
RS232 1 1
USB x x
WiFi - -
Storage
Storage in GB [optional] 4 [32] 4 [32]
Total sample rate 8950 8950
Sample rate per channel up to 1.000 Hz up to1.000 Hz
Other
Acceleration sensor - -
Gyroscope - -
Connector 2x AMP 35-p, Binder 711 3-/5-p, Amphenol, Rosenberger 2x AMP 35-p, Binder 711 3-p, Amphenol, Rosenberger
MOT o o
Display - -
Alarm lights - -
Shift lights - -
Berechnete Kanäle x x
Light sensor - -
Measurement 234,5 x 94,6 x 49,5 mm 161 x 100,6 x 50,6 mm
Weight 761 gr 370 gr
Protection class IP65 IP65
Expansion
GPS o o
Lambda o o
Displays o o
SmartyCam o o
TC-Hub 10 10
Channel Expansion / ACC 10 10
Shift Light Module o o
Memory Module o o
Remote Buttons Interface o o
RIO02 o o
x = standard | o = optional | - = not possible | Digit = amount


These could be interesting for you as well
 description    price 
With this AMP Bushing female, 35 pin for AiM PDM32, you can create your own wiring harness.

Devices: AiM ..
ex 20,23 € 
With this AMP Bushing female, 35 pin for AiM PDM08 and PDM32, you can create your own wiring ..
ex 20,23 € 
With this Amphenol SurLok Plus connector you can connect your AiM PDM32 or AiM PDM08 to the vehicle ..
ex 34,51 € 
You can use this connection cable to connect additional AiM extensions to your AiM PDM08 or AiM PDM32. ..
ex 54,74 € 
You can use this connection cable to connect a 6" or 10" display to your AiM PDM32. ..
ex 238,00 € 
This AiM USB data transfer cable connects an AiM evo4S, evo4 or ECU Bridge to your PC. ..
ex 54,74 € 
You can use these connection cables to connect two rear cameras to the AiM MXx or AiM PDM32. ..
ex 101,15 € 
You can use this connection cable to connect a rear camera to the AiM MXx or AiM PDM32. ..
ex 77,35 € 
With the AiM rear camera, you can always keep an eye on the driver behind you on your ..
ex 77,35 € 
The AiM PDM Dash 10" Race is a freely configurable 10" TFT display without data recording. It can ..
ex 1011,50 € 
The AiM PDM Dash 10" Street is a freely configurable 10" TFT display without data recording. It can ..
ex 1011,50 € 
The AiM PDM Dash 6" is a freely configurable 10" TFT display without data recording. It can be ..
ex 714,00 € 
The AiM PDM Dash 6" Street is a freely configurable 6" TFT display without data recording. It can ..
ex 714,00 € 
AiM Store by memotec Messtechnik | Bauwaldstrasse 1 | D-75031 Eppingen | +49.7260.920440 | info@aim-store.de | www.aim-store.com