Order
Info
Data
Accessory
Sie sind hier: Devices > Solo 2 > Solo 2 DL > Solo 2 DL
Solo 2 DL
Solo 2 DL
photo photo photo
The version Solo 2 disposes over all functions, which are needed for Operations like for example Regularity, Dragster, Circuit, mountain race... Over USB the wanted track coordinates are transmitted to the SOLO 2 or the driven measurement data to the analyses to the PC. The version Solo 2 DL has additional an integrated data logger, which records, shows and safes the data via OBD II or vehicle—CAN-bus (at the moment AiM can communicate with approx. 2.000 control units).
delivery status: available for immediate delivery
article number description Info image /unit* order
OASODL22-ACRHSolo2.2 DL, CC CAN/RS232, bracket Solo 2 DL
892,50 €
  Place in cart
OASODL22-ACKHSolo2.2 DL, CC CAN/K-line, bracket Solo 2 DL
915,11 €
  Place in cart
OASODL22-AOHSolo2.2 DL, CC OBDII, bracket Solo 2 DL
892,50 €
  Place in cart
OASODL22-ARHSolo2.2 DL, CC RPM, bracket Solo 2 DL
892,50 €
  Place in cart
* prices incl. VAT plus package and delivery.
The latest development from AiM is called Solo 2 . Available in two versions, it can either be used as a pure GPS-Lap timer or as a data storage device.

The version Solo 2 disposes over all functions, which are needed for Operations like for example Dragster, Circuit, mountain race... Over USB the wanted track coordinates are transmitted to the SOLO 2 or the driven measurement data to the analyses to the PC. Thanks to the 12V connection, it can also be supplied over the power supply network through an internal battery.

The version Solo 2 DL has additional an integrated data logger, which records, shows and safes the data via OBD II or vehicle—CAN-bus (at the moment AiM can communicate with approx. 2.000 control units).

The Dash logger as also the lap timer, disposes over an internal 3 axis acceleration sensor, gyroscope, magnetometer and an integrated 25 Hz GPS. The internal ring memory summarizes 4 GB and can record with a sum scan rate from 5.000 Hz with 12bit recording resolution.




Logo CAN-Bus Technologie
CAN-Bus Technology

Special features Solo 2 DL

  • Lap times with up to 5 split times
  • Triaxial acceleration sensor, gyroscope, magnetometer
  • Rechargeable lithium battery
  • 10 configurable RGB shift lights
  • 4 GB storage
  • Integrated GPS module
  • Various modes (circuit, hill climbs, point to point)
  • ECU interface CAN, K-Line, RS232, OBDII (only SoloDL)


Connection example Solo 2 DL

Connection example AiM Solo 2 DL

Technical data AiM Solo 2 DL

Tachometer Pickup over CAN, RS232 or OBDII
Speed Pickup over CAN, RS232, OBDII or GPS
Time measurement over GPS
  - measuring accuracy 1/100 sek.
  - up to 5 split times
  - Start- and finish line separate settable
  - Predictive lap time
Acceleration triaxial acceleration sensor ± 5g, Gyroscope, Megnetometer
Sum scan rate 5000 Hz
Connector 1x socket (Binder), 711, 5-pins | 1x socket (Binder), 711, 7-pin
Data storage nonvolatile internal 4 GB memory
Power supply internal rechargeable lithium-battery
External 8 - 16V over power supply network
Updates Software- and firmware updates free over the internet
Measurements 98 x 73,7 x 30,2 mm
Weight 240 gr.
Protection class IP 67

Functions of the Solo 2 DL

Functions AiM Solo 2 DL
1 Number of satelites 2 State of charge of the battery 3 10 free configurable led's (Predictive Laptime, RPM)
4 indication free configurable 5 Info Line 6 The function of the buttons is shown each in the row above
7 Connection for expanding the logger through for example Lambda 8 Connector for the connection to the engine control unit (CAN, RS232, OBDII)


AIM Solo AIM Solo DL
Solo SoloDL
GPS Laptimer
RPM - CAN-Bus | RS 232 | OBD II
Lap time GPS GPS
Speed GPS GPS | CAN-Bus | RS 232 | OBD II
Acceleration x x
Lap time projection x x
Time | Date x x
Height difference x x
Route | Track recording x x
1/4 Mile Mode x x
Start/finish line separately settable x x
Regularity mode x x
Dashlogger
Temperature - x
Throttle possition - x
Brake pressure - x
Seetring angle - x
Oil pressure - x
Brake - x
Gear - x
Oil temperature - x
Lambda - x
x = possible |  - = not possible  |  CAN Data depending on respective protocol


These could be interesting for you as well
 description    price 
This cable allows the AiM Solo 2 DL dash logger to pick up the engine RPM from the ..
ex 59,50 € 
This cable allows the AiM Solo 2 DL dash logger to be connected to the vehicle via either ..
ex 82,11 € 
With this cable, the AiM Solo2 DL dash logger can be connected to the vehicle either via CAN ..
ex 59,50 € 
This cable can be used to power the AiM Solo 2 DL or Solo 2 via the cigarette ..
ex 59,50 € 
With this cable, the AiM Solo 2 DL dash logger can be connected via the EURO5 diagnostic interface ..
ex 82,11 € 
This cable allows the AiM Solo 2 DL dash logger to be connected to the vehicle via the ..
ex 59,50 € 
Here you will find the connection cable for AiM Taipan ECU to connect a Solo 2 DL. ..
ex 59,50 € 
Here you will find the connection cable for AiM Yarara ECU to connect a Solo 2 DL. ..
ex 59,50 € 
This pipe claw mount from RAM allows the AiM Solo 2 DL to be attached to the roll ..
ex 82,11 € 
With this suction mount kit from RAM, the AiM Solo 2 DL can be attached to the windscreen ..
ex 82,11 € 
Via the various holes, this bracket can either be screwed on directly or connected to a ball head ..
ex 29,75 € 
With this special bracket, your Solo2 or Solo2DL can be attached to a motocross machine on the handlebar ..
ex 119,00 € 
With this special bracket, your Solo 2 or Solo 2 DL can be attached to a motocross machine ..
ex 119,00 € 
This power adapter can be connected directly to the expansion port of the AiM Solo 2 DL. ..
ex 71,40 € 
The AiM ACC | Analog CAN Converter expands the AiM devices with four additional analog or digital channels. ..
ex 357,00 € 
AiM Store by memotec Messtechnik | Bauwaldstrasse 1 | D-75031 Eppingen | +49.7260.920440 | info@aim-store.de | www.aim-store.com