AiM Taipan ECU for Motocross, Supermoto and Enduro

Order

Info

Compatibility

Accessories

Sie sind hier: Devices > Taipan > Taipan

Taipan

AiM Taipan ECU is a plug & play engine control unit for Motocross, Supermoto or Enduro bikes. The injection times, ignition angles, quickshifter or traction control can be stored and selected by different mappings. The 32-bit core guarantees an accuracy of 1/10 degree. This reults in a very consistent engine rotation, exact results by repeat dozens of tests at a bench and in the end more power at the wheel.

On the two analog inputs, for example a barometric pressure sensor can be connected. A second injector or an electric water pump can be connected via the two digital outputs.

delivery status:

available for immediate delivery

article number	description	€/unit*
OATAI13-UBL	Taipan ECU 1.3, w. UC Bridge, w.Handle Bar Switch	880,60 €
OATAI13-UB	Taipan ECU 1.3, w. UC Bridge	785,40 €
OATAI13-L	Taipan ECU 1.3, w. Handle Bar Switch	761,60 €
OATAI13-UBTL	Taipan ECU 1.3, w. UC Bridge Tuner, w.Handle Bar Switch	1475,60 €
OATAI13-UBT	Taipan ECU 1.3, w. UC Bridge Tuner	1380,40 €
OATAI13-oZ	Taipan ECU 1.3, without accessory	666,40 €

* prices incl. VAT plus package and delivery.

AiM Taipan is AiM's newest aftermarket plug-and-play ECU designed exclusively for off-road motorbikes. Thanks to its high-tech 32-bit core, it is a significant step forward in improving the performance of your motorbike without compromising reliability and smooth running.

The specific Taipan ECU is not programmed. It can be configured for any brand or model of motorbike from the compatibility list. To enable this step you will need the UC-Bridge Tuner. Alternatively, you can let us know the exact model when ordering so we can complete the first step for you.

Once the unprogrammed Taipan ECU has been configured with a specific brand or model, it can no longer be changed. From that point on, only the respective maps can be modified.

It provides ultimate control over vehicle feel, ignition, ignition phases, launch maps, Lauch Control, traction control, and maximum and engine temperature correction.

CAN-Bus technology

Special features Taipan ECU

High-tech 32-bit core
Manage up to 5 selectable maps
Extended base map for immediate performance improvement
Optional 2 analog inputs
Optional 2 digital inputs
Map Optimization of the Launch Control
Map Optimization of the Traction Control
Optional Handle Bar Switch

Connection example Taipan ECU

Technical data AiM Taipan ECU

Analogue channels	optionally 2 inputs (0-5V) each 1000Hz sampling rate for controlling external sensors, e.g. air pressure optionally 2 digital switched outputs for controlling the second injection Valve and e.g. a water pump
Setting options	Ignition Injection Launch Control Traction Control RPM Limiter Speed Limiter Quick Shifter Switch Handle Bar (can also be used shiftlight modul) Varius Maps
Processor	High technology 32-bit core: - Guarabteed ccuracy at 20000 rpm a maximum deviation 1/10 degree - 0,8 µsec for turning the spark ON
Updates	Software- und Firmware updates for free over the internet
Connector	1x JST 04T-JWPF-VSLE-S 1x JST 08R-JWPF-VSLE-D 1x JST 04R-JWPF-VSLE-S 1x 33-Pin Male ECU-Connector
Power consumption	150 mA
Body	Polyamid 6 + 30% glass fiber
Measurements	Housing: 89,4 x 75,4 x 29,3 mm
Weight	260 g
Waterproof	IP67

The functions of Taipan ECU


1	Connection ECU	2	Connection CAN 1 Switch Handle Bar	3	Connection CAN 2 UC-Bridge / UC-Tuner
4	Coonection analouge- / Digitalchannel

The UC-Bridge

The UC-Bridge is required to establish a connection between the AiM Taipan and your PC. It allows you to upload various maps or maps that you can purchase from professional tuners and to read the diagnostic information from the AiM Taipan.

The UC-Bridge-Tuner

With the AiM UC-Bridge Tuner, the tuner/motorcycle specialist can create tuner maps, configurations and strategies for the customer's motorbike on a dynamometer. The tuner can then flash these directly to the Taipan ECU or email them to the customer to download the created configuration and install it on the Taipan ECU using the AiM UC-Bridge.

mehr Infos

Compatibility of the Taipan ECU

GasGas
Please state the exact model when ordering, as the device must be configured in advance. Or contact us at: info@me-mo-tec.de
	Year of manufacture	Taipan
MC 250F	2021-2023	x
MC 450F	2021-2023	x
EC 250F	2021-2023	x
EC 350 F	2021-2023	x
Honda
CRF 250R	2019-2023	x
CRF 450R	2019-2022	x
CRF 450L	2021-2023	x
CRF 450X	2021-2023	x
Husqvarna
FC 250	2019-2023	x
FC 350	2019-2023	x
FC 450	2019-2023	x
FE 250	2020-2023	x
FE 350	2020-2023	x
FE 450	2020-2023	x
FE 501	2020-2023	x
FS 450	2019-2023	x
Kawasaki
KX 250	2021-2023	x
KX 450	2019-2022	x
KTM
SX-F 250	2019-2023	x
SX-F 350	2019-2023	x
SX-F 450	2019-2023	x
EXC-F 250	2020-2023	x
EXC-F 350	2020-2023	x
EXC-F 450	2020-2023	x
EXC-F 500	2020-2023	x
SMR 450	2019-2023	x

x = possibel
- = not possible

These could be interesting for you as well

description	price
Handlebar Switch With the AiM Handlebar Switch, you can set the mappings, fuel correction, launch control or traction control from ..	ex 107,10 €
USB-Data transfer modul UC Bridge This AiM USB data transfer modul connects your AiM Taipan ECU to your PC. ..	ex 136,85 €
USB-Data transfer module UC Bridge Tuner This AiM USB data transfer modul connects your AiM Taipan Tuner ECU to your PC. ..	ex 714,00 €
Extension cable JST04T-JST04R, 4 pin AiM extension cable with JST 04 male to JST 04 female and 4 pin for AiM Taipan, Taipan ..	ex 47,60 €
Connection cable Taipan Analog Here you will find the connection cable AiM Taipan to connect analog sensors. ..	ex 59,50 €
Connection cable Taipan Solo 2 DL Here you will find the connection cable for AiM Taipan ECU to connect a Solo 2 DL. ..	ex 59,50 €
Connection cable Taipan, Analog, Injector Here you will find the connection cable to connect a analog sensor and a injector on your AiM ..	ex 59,50 €